In this article we’re going to look at how to make your own dog mask. We’ll cover the basics and then go on to take a look at some of the more advanced tips and techniques which you can use.
For those who have a dog that likes to bark, and particularly if your dog loves to play in the garden and other areas of the home, you need to get them some particular dog protection.
Paper Plate 3d Dog Mask DIY Materials: This is the initial part of the set-up which will look a little scary at first, but it’s actually quite straightforward. All you have to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can not simply cut a rectangular shape from the cardboard, so you’ll have to cut around the edge of the mask so that you get something that looks like a cone. The main thing here is to be realistic with what kind of paper plate that you’re using.
Then you will have to wrap the cardboard around the edges of the paper plate, making certain there is a good seal between the two pieces so you can make certain that nothing will leak once you put the mask on. Be sure that the edges are cut so the edges are not sharp, as this may damage the edges of the mask.
Glue it on! The next step involves using some paint. You ought to spray the paint over the cardboard, making sure that it runs smoothly and evenly across the whole mask. You’ll want to start with one side of the mask , so you can work your way round it before moving onto the other side. The paint has to be slightly thicker than the cardboard, and it’s best that you leave about one-fifth of an inch of paint on the edges so that it runs across the cardboard.
Don’t worry too much about the paint getting stuck to your mask. It’s easy to remove it later, and it will leave you with a wonderful finished mask to show off to everybody! It’s also a good idea to wipe away any excess paint after you’re done, so you don’t wind up with smudges or smears on your dog.
Then it is time to glue the mask on your dog’s head. First you will need to make sure that you have a secure fit between the mask and your dog’s head. Once you’ve made sure that it’s secure, then you can begin to glue the mask on the dog’s face. Take the piece of cardboard that is used for the base of the mask and http://taigamemienphidt.com/?p=11618 fold it over. Make sure that it’s quite strong and then use your hands to secure the cardboard down in place.
Keep your hands out of the way and use tape to hold it in place as you repeat the process on the cardboard folds until you’ve got the mask snugged firmly onto the surface of your dog. Do not make the folds too big or else it could look messy. Once you’ve completed this, you can then take out the mask and then attach the cardboard ears. And attach the other area of the mask on the dog. Make certain that the ears are level and be certain it is not too short or long as this will cause some issues with the mask slipping off the dog’s face.
If you are using a dog mask as your pet security, you’ll need to do some sanding to be sure that it is secure on your dog. You can accomplish it by sanding off any excess paper that may have been eliminated from your mask.